Izdelki za oprema za modele (15)

The air purifies the flour dust mixture from flour dust, traps the flour dust and ensures that clean air is expelled from the chimney. Flour dust captured by specially woven bags returns to the system. Thus, flour loss is prevented. The filter section body is made of 2-6 mm sheet metal and the lower part is a cast iron plate. The transmission and engine parts are located on the cast plate. The gearmotor is mounted on the transmission as a battery. The transmission located in the filter section drives the steel plate arm also located in this section. There is an air suction cup on this steel arm. This air suction cup closes the filter bags on its upper part and located in the pipe section, one by one, at regular intervals (with the help of the transmission movement arm) and sucks the product inside. Meanwhile, the clean air included with the product

Κεντρικός στύλος αλουμινίου 70x70x2,5mm 20x30x2mm αλουμίνιο 8 ραβδώσεις Μη σπασμένα πλαστικά μέρη Μαρμάρινη βάση 300 κιλών χωρίς τροχό Πολυεστέρας, ολεφίνη και ακρυλικό ύφασμα βαμμένο με διάλυμα

Control sieve is used in grain production facilities (flour mills, corn factories, etc.) to check the product before packaging. These are facilities with low capacity and space problems with a second purpose of use. Safes can be manufactured as 5 and 10 layers. It can be installed anywhere without any problems. WORKING PRINCIPLE It has its own suspension chassis. Thanks to the chassis, the sieve is mounted on the floor. The chassis on which it is hung has a solid construction. It works with a system driven from the bottom center of the sieve. It is operated by the electric motor mounted on the lower rear part of the machine. The swinging diameter of the sieve can be adjusted with the two-weight drive system.

DISTRIBUTOR

PGD ​​2207

It is used for vertical transportation of wheat. It consists of two parts: lower and upper heading. Pipe length is adjusted according to the building height. The drive of the elevator is made by the reducer motor located on the upper head. The motor stand has slides and can be easily adjusted to enable shaft center adjustments. Belt tension is provided by the tensioning mechanism connected to the bearings.

DISC DIAMETER is 660/520/420 mm. CHEWING WIDTH .228 mm TOTAL WIDTH .290 mm PALLETLING AREA .4727cm2 DISC WITH CONICAL RINK AND BOLT INTERNAL SPEED .6,9 m/secROLL DIAMETER .320 mm.ROLL WIDTH .232 mm DOUBLE ROLLER .BELT PULLEY TRANSMISSION and TWIN MOTOR 15* 15 TOTAL 30 PIECES V BELT DRIVEN MAIN MOTOR 2 PIECES 110 KV 1000 rpm .PELLET CELL 304 QUALITY STAINLESS STEEL PELLETIZING CELL SAFETY SWITCH .FIXED MAGNET .1 PIECE CHROME STEEL XT 86,day WITH DRILLING METHOD DRILLED VACUUM HARDENED AND TURNED-ISO 9002 QUALITY CERTIFIED PELLET PRESS DISC 1 SET COMPLETE ROLL.

PGD 3313

Pneumatic Cyclone Group is a system that moves the spilled product with air flow. The transportation process is carried out in pipes and the transported materials are sent to the Pneumatic Cyclone. Cyclones are made of sheet steel construction. It has a cylindrical-conical body and consists of an inlet and outlet pipe. It is designed to keep the air loss of the system to a minimum during the separation of air and product in the pneumatic system.

In pneumatic systems, it is used to separate air and product and to discharge the product inside the cyclones. The product inside the cyclones enters from the cage part of the machine and product passage is provided through the pockets on the rotor.

Chain conveyors are conveyor systems that drive chains and thus enable transportation of the material to be transported with equipment suitable for the material to be transported. Chain conveyors are high-strength carriers that transfer goods at high capacities. In chain conveyors, the chain appropriate to the size and weight of the material to be transported is selected. Chain conveyors consist of 3 main parts: drive section intermediate body tensioner section

It ensures the cleaning of barley, rye, cracked wheat, vetch and black grass seeds in wheat. It performs this cleaning thanks to the sphere-printed sheet metal attached to the body with screws. As this sheet rotates, it separates the materials that will adversely affect the grinding in the incoming product, according to the diameter of the sphere pressure and the spiral angle given by the adjustment lever. The cleaning process takes place at 36 rpm. The trieur machine consists of four main parts, these are: Wheat input Wheat cleaning part Clean wheat output Broken wheat output

Screw auger is used for horizontal transportation of grain or finished products. It has a U-shaped structure.

Roof exhaust fans prevent grain spoilage by providing efficient ventilation. These high-capacity fans function as a vacuum cleaner and eliminate dust on your grain. The most ideal form of silo ventilation; While the ventilation fans are on, the exhaust fans are kept open at all times. Thus, while the grain is completely ventilated, the moist air is easily expelled out of the silo.

300x300/8 SQUARE “T” MODEL DOUBLE BANANA UMBRELLA with BASE 350x350/8 SQUARE “T” MODEL DOUBLE BANANA UMBRELLA with BASE 300x400/8 RECTANGULAR “T” MODEL DOUBLE BANANA UMBRELLA with BASE 300/8 CIRCULAR “T” MODEL DOUBLE BANANA UMBRELLA with BASE 350/8 CIRCULAR “T” MODEL DOUBLE BANANA UMBRELLA with BASE